Special-shaped insert machine is now a common machine in the production process of 

electronic production enterprises, we may encounter a variety of problems in the process 

of operating this machine, if there is no relevant experience or no knowledge, it is very 

simple to panic in that situation. Let's talk about several common problems and solutions 

of the special-shaped insert machine, and expect that we will have certain assistance.

Five common problems of special-shaped insert machine and their solutions

1, the special-shaped insert machine will show heat in the use of the situation, we will 

worry about this situation will damage the equipment, in fact, the general heat is caused 

by equipment overload operation, if we turn on the heat situation, then we have to check 

the internal problems of the equipment, to correct in time.

2, when our equipment is faulty, it is natural to want to do a good job of correction, when 

the SMT placement machine is dead, what aspects do we need to pay attention to? It can 

solve the problem well, so as to avoid the huge loss caused by the equipment can not work.

3, in order to ensure that the machine can extend its service life, we should carry out good 

maintenance of the placement machine in the usual operation, and clean the machine 

regularly, because some parts of the machine are dirty, it may also affect the use of the 

placement machine.

4, and, in some more extreme weather, we try not to use special-shaped inserts, this is indeed 

a safety risk, but also may bring negative effects to the operation, so we need to pay particular 

attention to this.

5, together with the use of special-shaped insert machine, some relevant useful specifications 

are also required that we have a good grasp of some relevant operational matters, especially 

where the need to pay attention.

The above five points are the problems that the special-shaped insert machine will encounter 

in the daily operation process, and it is expected that these contents will be of certain assistance 

to us.

Article from the Internet.